Tile Adhesive is a polymer modified grey / white cement-based adhesive for fixing all types of tiles on floor/walls. It is suitable for both internal & external applications. It provides excellent waterproofing properties and resists cracking of tiles.


Tile Fixer (Standard) Tile Fixer (Premium) Tile Fixer (Premium +)
Flooring Flooring Flooring
Ceramic Tiles Ceramic Tiles Ceramic Tiles
Vitrified Tiles Vitrified Tiles Vitrified Tiles
Vertical Tiles (Up to size 2×2 Only) Vertical Tiles Vertical Tiles
Internal Wall Internal Wall Internal Wall
External Wall External Wall External Wall
Stones Marble
Glass Mosaic Glass Mosaic
Swimming Pool Tiles
Tiles Fixer Standard
Tiles Fixer Premium
Tiles Fixer Premium+


Sr. No. Properties Tile Fixer (Standard) Tile Fixer (Premium) Tile Fixer (Premium +)
1 Appearance Gray Powder Gray Powder Gray / White Powder
2 Pot Life 60 min. 60 min. 30 min.
3 Open Time 15 – 20 min. 15 – 20> 15 – 20 min.
4 Setting Time 24 hours 24 hours 24 hours
5 Share Adhesion Strength
(Dry Condition 14 days)
8 KN 10 KN 10 KN
6 Coverage (per 20kg. Bag) 50 – 52 sqft (For 3mm thickness) 38 – 40 sqft (For 4mm thickness) 30 – 32 sqft (For 5mm thickness)
7 For Wall Use thin bed trowel (3mm) Use thin bed trowel (3mm) Use thin bed trowel (3mm)
8 For Floor Use thin bed trowel (6mm) Use thin bed trowel (6mm) Use thin bed trowel (6mm)
9 Shelf Life (If Stored as per manufacturer’s guidelines) 6 months 6 months 6 months


  • Easy to Apply, One Pack Adhesive
  • Just Add Water For Use
  • High Strength
  • Dual purpose for floor and wall with good workability
  • Zero Wastage
  • No Shrinkage Cracks
  • Economical & Time Saving


  • Add 20 kg of Tile Fixer to approx. 4.0 to 5.0 litters of cool and clean tap water.
  • Blend properly for 5 minutes by hand or an electric stirrer to get a smooth and homogeneous mixture.
  • After blending wait for 10 minutes, blend once again only prior to spreading.
  • Now apply the adhesive on the surface utilizing the indented trowel keeping up a layer of 4mm.
  • Press the tiles within 10 to 15 minutes with a shuffling movement onto the adhesive. Check properly to ensure that the back of the tile is in full contact with the adhesive.
  • Remove excess adhesive immediately from the joints.
  • The proper preparation of the surface will make the fixing easier and quicker ensuring a better finish. The surface should be flat with a tolerance of 4mm over a distance of 2 meters. It is essential to waterproof wet areas prior to tiling.
  • Under normal circumstances the joints may be filled after minimum 24 hours.


  • 20 kg bag is available